

If you do not wish to have MAC Filtering on for your network, simply turn it off or disable it. If MAC Filtering is on or enabled, you will need to add your Nintendo system's MAC Address to the list of allowed devices and save or apply this change.Type the MAC address of the computer or device to give it access to the specified interface. You must select the Interface for the wireless network. Create a reject rule for each of the wireless networks you want to ONLY allow the special devices you added in Step 1. Select the Restrict access by MAC address check box. Create a Caps Access Rule for each device you want to allow, make sure you put in the MAC Address and set Action to accept. Depending on your router, MAC Filtering may also may be referred to as MAC Address Control, Address Reservation, or Wireless MAC Authentication. Select the interface on which you want to enable MAC Access Control, then click Edit.For instance, if you are using 192.168.1.0/24 on your network, you could give addresses in 192.168.2.1 to 192.168.2.10 to hosts that do not have the correct MAC. This is most often found within a router's Wireless or Wireless Security options. You could then assign an address within the valid IP segment to certain MACs, but assign addresses from an incorrect IP address range.Search through your router's settings until you locate the tab or setting MAC Filtering.

If you wish to use this feature on your network, we recommend you contact the router manufacturer for assistance in setting this up. For troubleshooting purposes, you do not need to enable MAC Filtering if this is already disabled.Filter on mac may block some, but not all. If MAC Filtering is enabled on a wireless router, any wireless devices connected to that router will be unable to connect until their MAC address is entered into the MAC Filter settings. MikroTik RouterOS 6.29.1 im blocking the traffic between a network and some hosts: 1 chaininput actiondrop mac-protocolip src-address192.168.0.16/28 dst-address172.16.0.0/24 logno log-prefix''.
